dz-chint-nav _ngcontent-lfe-c2="" class="ng-star-inserted">
Brilliant Tips for Drop Wire Clamp Newbies
2022-04-28

Uses: At the tensile terminal of the optical cable and the connecting tower, the optical cable is led down and fixed on the tower to prevent it from 

shaking;

Features:

1. Using hot-dip galvanized steel, stainless steel and rubber, the device is sturdy and can maintain the optical cable well and 

prevent the optical cable from being worn;

2. It is divided into two types: pole and tower. The distance between the downlinks of ordinary optical 

cables is installed every 1.5 meters, and the poles and towers that generally need to be installed with downlink clamps are 15 to 20 sets per base.

6.jpg5.jpg


The drop wire clamp is made of an open trough that can take in a cable without threads, whereas, the open portion of the trough is defined 

well through edges and is supported in order to become able to support the strands which get separated from the drop wire clamp. On the 

other hand, the plate is extended from one end of a trough and provides sources for engagement.

First of all, lay the cable in the shell and place the shim on the top of the cable through raised embossing used against the cable. You need to 

then insert the wedge in the shell which is on the top of the shim and then pull to engage. The small end of the wedges needs to be engaged

in the track of the large end of the shell. You can then place the bail wire on the B drop wire hook through the help of a wedge loose. Then, 

pull the drop wire through the clamp until the proper side walk or the alley clearance is attained. Then, you need to grasp the clamp and pull 

it tightly for securing it.

The drop wire clamp with its intelligent structure and form is used to provide support to different objects at a cable. In most cases, it is capable 

of supporting one and two pairs of telephone drop wires.


Uses: At the tensile terminal of the optical cable and the connecting tower, the optical cable is led down and fixed on the tower to prevent it from 

shaking;

Features:

1. Using hot-dip galvanized steel, stainless steel and rubber, the device is sturdy and can maintain the optical cable well and 

prevent the optical cable from being worn;

2. It is divided into two types: pole and tower. The distance between the downlinks of ordinary optical 

cables is installed every 1.5 meters, and the poles and towers that generally need to be installed with downlink clamps are 15 to 20 sets per base.