AC-O-07-500 and AC-O-10-500 Dead End Clamp
product detail
Description
The anchor clamp is designed to anchor insulated main line with 4 conductors to the Pole, or service lines with 2 or 4 conductors to the pole or wall. The clamp is composed of a body,
wedges and removable and adjustable bail or pad.
One core Anchor clamps are design to supporting the neutral messenger, the wedge can be self-adjusting. Good corrosion resistance, use high quality materials.The quality of the
installation of anchoring clamp is guaranteed.
Key Features:
Tool free installation with wedges sliding inside the body.
Easy to open bail permits fixing to brackets and pigtails.
Adjustable length of bail in three steps.
high mechanical stability.
Item No. |
Cross Section(mm2) |
Conductor(mm) |
Breaking Load(KN) |
AC-O-07-500 |
16-25 |
3-7 |
7 |
And the installation instruction are as followed:
1.Attach the clamp to the pole bracket using its flexible bail.
2.Place the clamp body over the cable with the wedges in their back position.
3.Push on the wedges by hand to initiate the gripping onto the cable.
4.Check the correct positioning of the cable between the wedges.
5.When the cable is brought to its installation load at the end pole,the wedges move further onto the clamp body.When installing a double dead-end leave some extra length of
cable between the two clamps.
At the same time, we can also provide customized product services according to customer requirements. Although our product prices are not necessarily the lowest, they must be
the most valuable.Any questions just contact us freely.