AC-O-05，AC-O-08 and AC-O-10 Dead End Clamp
product detail
The AC-O-05，AC-O-08andAC-O-10Dead End Clamp
Cable Tension Clamp AC-O-05，AC-O-08andAC-O-10other called figure eight tension clamp orADSS cable clamp,is designed totension and anchor figure 8 cable messenger
or round ADSScable on outdoor aerial telecommunication lines
Key Features:
Self-adjustable wedge
Easy installation, request no additional tools
UVresistant thermoplastic and stainless steel bail, durable
No cable insulation damages and slipping
Allows installed with pole brackets or hooks
Excellent Environmental Stability
Competitive price
Item No. |
Cross Section(mm2) |
Conductor(mm) |
Material |
Breaking Load(KN) |
AC-O-05 |
16-25 |
3-7 |
UVresistant thermoplastic and stainless steel |
3 |
AC-O-08 |
16-25 |
6-8 |
4 |
|
AC-O-10 |
16-25 |
8-10 |
5 |
And the installation instruction are as followed:
1.Attach the clamp to the pole bracket using its flexible bail.
2.Place the clamp body over the cable with the wedges in their back position.
3.Push on the wedges by hand to initiate the gripping onto the cable.
4.Check the correct positioning of the cable between the wedges.
5.When the cable is brought to its installation load at the end pole,the wedges move further onto the clamp body.When installing a double dead-end leave some extra
length of cable between the two clamps.
At the same time, we can also provide customized product services according to customer requirements. Although our product prices are not necessarily the lowest, they
must be the most valuable.Any questions just contact us freely.